Neckline facing
A pattern piece used to finish the raw edge of the neckline cleanly.
Where it is used
4. Stitch neckline trim
p. 6- Stitch the neckline trim. Seam allowance: 1.0 cm.

Pressing Neckline Facing
p. 4- Press the neckline facing in half lengthwise, with the wrong sides together.

Interfacing Back Neckline
p. 1- Apply interfacing to the back neckline facing from the wrong side.

6. Neckline Finishing: Step 6.2
p. 7- Finish the neckline with the lining, leaving a 0.7 cm seam allowance.

6. Neckline Finishing: Step 6.4
p. 7- Stitch along the neckline facing seam at 0.1 cm from the lining side.

Interfacing
p. 1- Apply interfacing to the cut pieces from the wrong side: front facings, the back neckline facing.

Assemble Facing and Interfacing
p. 8- Place the non-fusible side of the interfacing neck facing onto the right side of the neck facing. Match up the outer edges and pin in place. Stitch with a 1.0 cm seam allowance.

Marking Stand Edge
p. 9- Mark the application line of the stand edge on the neckline area from the wrong side according to the markings on the front, back, and yoke patterns.

Stitching Collar Neckline
p. 28- Stitch along the neckline and the facing, starting and ending your seam precisely at the corners (from notch to dart).

Marking the Neckline Centers
p. 3- Mark the center of the front and back at the neckline edge.

Pressing Neckline
p. 16- Press the edges of the front and neckline of the front and back pieces, creating a 0.1 cm roll from the front, back, and ruffle details.

Preparing the Neckline Facing
p. 2- Fold the neckline facing piece in half lengthwise, wrong sides together. Use your iron to give the neckline a smooth, rounded shape. As you press, gently stretch the outer edge while easing in the fold.
Related terms
stabilized byBias fusible tape
requiresIron
stabilized byFusible interfacing
← applied toNeckline facing shaping
stabilized byFusible interfacing
depends onUnderstitching
stabilized byBias fusible tape
depends onUnderstitching
stabilized byFusible interfacing
applied toKnit fabric