Zipper foot
A presser foot designed to sew close to zipper teeth.
Where it is used
Wrapping Zipper End
p. 11- Place the extra fabric piece right sides together with the lower edge of the zipper and sew across using presser foot width.

Sewing Left Zipper Tape
p. 5- Sew in the zipper using a single presser foot, keeping a 0.7 cm distance from the edge of the tape. Press to finish.

Sewing Right Zipper Tape
p. 6- Sew the zipper using a single-sided presser foot, keeping a distance of 0.7 cm from the edge of the tape. Press to finish. Carefully snip diagonally right up to the end point of the stitch—make sure not to cut into the zipper tape.

Pressing Zipper Closure
p. 7- Zip up and press.

Securing Zipper Tape
p. 8- Stitch the zipper tape onto the seam allowance of the side seam, keeping the line of stitching 0.5 cm away from the zipper teeth. Use a single-toe presser foot for this step.

ZIPPER PROCESSING
p. 15- Stitch along the zipper with a straight stitch, keeping 2–3 mm away from the zipper teeth and using the special presser foot. Remove the basting threads when finished.

Related terms
← requiresZipper
← requiresFly front zipper installation