Shoulder seam
The seam joining the front and back panels at the shoulders, sewn at a 1.0 cm allowance. The seam that joins the front and back bodice pieces at the shoulder. (merged)
Where it is used
Secure Left Shoulder Seam
p. 6- Swap out the twin needle on your machine for a stretch needle. Fold the seam allowances on the left shoulder toward the front, pull the overlock thread tail, and from the right side, secure it with a bar tack about 0.5 cm from the shoulder seam. The bar tack should be 3–4 stitches long. You can also secure the seam allowances by hand from the inside if you prefer. Press with an iron.

Sewing Shoulder Seams
p. 2- Sew the shoulder edges together. Seam allowance 1.0 cm.

Reducing Bulk at Shoulders
p. 10- Trim the seam allowances at the shoulder seams to reduce bulk.

3. Sewing Shoulder Seams
p. 5- Sew the shoulder edges together with a 1.0 cm seam allowance.

1. Pin Shoulder Seams
p. 3- Place the back and front pieces together with the right sides facing each other. Pin along the shoulder edges. To stitch the shoulder seams, you'll need strips of knit fabric cut on the grain, 1.5 cm wide. These can be cut from jersey fabric in a color that matches your project. You can also use a silicone tape or fusible stay tape for this step.

Stitch Shoulder Seams
p. 3- Place the front and back pieces right sides together, matching the shoulder edges. Pin in place. Stitch with a 1.0 cm seam allowance.

5. Press shoulder seams
p. 6- Press the shoulder seam allowances toward the back.

Sewing Shoulder Seams
p. 10- Sew and simultaneously serge the shoulder seams using a four-thread overlock machine. Allowance of 0.7 cm.

Joining Shoulder Seams
p. 6- Place the back and front pieces right sides together, joining at the shoulder seams. Pin or baste. Stitch on the machine with a 1 cm seam allowance, using backstitches (reinforcement).

Joining Shoulder Seams
p. 6- Place the back and front pieces right sides together, joining at the shoulder seams. Pin or baste. Stitch on the machine with a 1 cm seam allowance, using backstitches (reinforcement).

Stitch Shoulder Seams
p. 3- Place the front and back pieces right sides together, matching the shoulder edges. Pin in place. Stitch with a 1.0 cm seam allowance.

Shoulder Seams
p. 8- Sew the shoulder seams of the dress, allowing a 1.0 cm seam allowance.

Related terms
compatible withPress Seam Open
applied toFabric
pressed towardsFront piece
pressed towardsBack Panel
requiresThread
stabilized byShoulder seam reinforcement
stabilized byBias fusible stay tape
pressed towardsBack piece
requiresSewing machine
applied toLining fabric