Lining assembly
Stitching the lining pieces together, leaving an opening in one sleeve for turning the coat.
Where it is used
Sewing the lining side seams
p. 4- Sew the side seams of the front and back lining pieces, leaving a 4–5 cm opening in one side seam. Seam allowance: 0.7 cm.
Turning the top right-side out
p. 6- Turn the top right-side out through the opening left in the lining’s side seam.
Closing the lining opening
p. 8- Hand-sew the opening left in the lining’s side seam using invisible stitches.
5. Lining Preparation: Step 5.5
p. 6- Sew the shoulder edges of the lining together. Use a 1.0 cm seam allowance.
5. Lining Preparation: Step 5.4
p. 6- Pin the shoulder edges of the lining together, matching the edges. Make sure the right sides are facing each other.
5. Lining Preparation: Step 5.6
p. 6- Press the seam allowances of the shoulder seams open on the lining.
7. Armhole Finishing: Step 7.2
p. 8- Finish the armholes by attaching the lining to the front and back. Leave a 0.7 cm seam allowance.
7. Armhole Finishing: Step 7.1
p. 8- Pin the armhole edges of the lining to the armhole edges of the front and back, matching raw edges, notches, and seams, with right sides together.
8. Back Slit and Opening: Step 8.6
p. 11- Press the seam allowances of the back lining's center seam open.
8. Back Slit and Opening: Step 8.4
p. 11- Pin the center edges of the back lining, aligning the edges and notches, with right sides facing each other.
8. Back Slit and Opening: Step 8.8
p. 12- Pin the edges of the back opening to the edges of the lining, making sure the right sides are facing each other.
17. Turning Right Side Out
p. 17- Turn the top right side out through the opening left in the lining's side seam.
