Bagging the lining
Joining the lining to the main coat right sides together and turning it right side out through a sleeve opening.
Where it is used
5. Lining Preparation: Step 5.4
p. 6- Pin the shoulder edges of the lining together, matching the edges. Make sure the right sides are facing each other.

17. Turning Right Side Out
p. 17- Turn the top right side out through the opening left in the lining's side seam.

18. Closing Lining Opening: Step 18
p. 17- Pin the seam allowances of the lining's side opening together, standing them up on edge.

Turning Collar and Basting
p. 8- Turn the collar right side out and straighten the zipper corners. Smooth out the inside of the collar and baste it to the neckline edge, overlapping the collar seam by about 1 cm.

Closing Lining Opening
p. 21- Turn the jacket right side out through the opening you left. Sew the opening closed by hand.

12. Sew lining along armholes
p. 5- Fold the lining face-to-face with the back again and align along the armhole edges so that after sewing the armhole and cap are inside the lining (closed edge). Tack/sew the lining along the entire armhole, including the protrusion for the casing on the front. Turn it out, adjust, and trim the armhole allowance to 5mm if necessary, or notch the allowance at the bottom of the armhole.

10. Sew back lining to front lining
p. 5- Back lining 006 sew along the side seam with Front lining 001. Overcast the lower edge of the lining.

Step 7
p. 5- Pin the side edges of the lining together, matching the edges with right sides facing each other.

8. Pin lining side edges
p. 3- Pin the side edges of the front lining and back lining together, matching the edges and placing right sides facing each other.

11. Pin outer top to lining
p. 4- Pin the outer top to the lining along the upper edge, matching the raw edges and side seams, with right sides facing each other.

16. Pin lower edge
p. 5- Place the lining and the top together with wrong sides facing. Pin the lower edge of the outer top to the lining edge, turning a small section so the right sides face inward. Pin the edges through the open section at the hem.

18. Turn right-side out
p. 6- Turn the top right-side out through the opening left in the lining’s side seam.

Related terms
depends onLining assembly