Easing armscye
Sewing a temporary gathering stitch to slightly pull in and shape the front armhole curve.
Where it is used
10.1. Armscye Easing Stitch
p. 7- Sew an easing stitch along the front armhole edge on the section marked on the front pattern piece, setting the stitch length to 4 mm.

10.2. Gathering Armscye
p. 8- Gather the basting stitch, easing the section by 1.0 cm. Tie knots at both ends.

12. Securing Armhole Area
p. 11- Secure the side edges at the armhole area, aligning the armhole edges. Seam allowance: 0.7 cm.

15. Securing Armhole Seam Allowance
p. 12- Sew the seam allowance at the armhole area, -pressing the allowance toward the back.

Preparing the Upper Front Section
p. 7- Gather the bottom edge of the front upper piece. Between the two marks that show where to start and end the gathering, sew two rows of long, loose stitches, about 7 mm and 13 mm from the edge. Leave the thread ends loose. Pull gently on the lower threads to gather the fabric to match the pattern size. Spread the gathers evenly.

Armhole Finishing
p. 14- Make small cuts in the armhole facing seam allowances at the curves.

Related terms
requiresStraight stitch sewing machine
← depends onArmhole binding finish