Topstitching Facing
Understitching or topstitching the facing seam allowance at 0.1 cm to prevent the facing from rolling to the outside. Stitching the seam allowances to the facing close to the seam line to prevent the facing from rolling to the outside. (merged)
Where it is used
Sewing Neckline Binding
p. 3- Sew along the seam allowance at 1 cm, ensuring the stitch line catches the main edge thread. Press with an iron.

Securing the Wrap Front
p. 5- Sew a securing stitch across the overlapped bottom edge, keeping 0.5-0.7 cm from the raw edge.

Stitching Sleeve Hem Casing
p. 12- Topstitch the casing from the right side, sewing 0.1-0.2 cm from the inner folded edge. Leave a 2 cm opening near the side seam to insert the elastic.

14. Topstitch facing
p. 10- Topstitch the seam allowance of the facing to the lower edge of the front piece at 0.1 cm along the facing.

13. Attach facing
p. 10- Attach the facing to the lower edge of the front piece. Allowance: 0.7 cm.

15. Press facing
p. 10- Press the facing onto the front piece.

Topstitching Hem and Front Edges
p. 5- Pin or baste the allowances along the vertical edge and the hemline. Topstitch the allowances. Sew from the right side of the skirt, 0.8 cm from the bottom line and the vertical edge of the front panels. Backstitch at the beginning and end of the seam. Press.

Securing the Upper Waistband
p. 6- On the right side of the skirt, position the edge of the upper waistband so that it overlaps the attachment seam by 0.2 cm. Baste in place. Topstitch as close as possible to the edge of the waistband.

Topstitching the casing
p. 7- TOPSTITCH ALONG THE MARKED CASING LINE, LEAVING A 2.0 CM OPENING AT THE SIDE SEAM AREA.

Pant leg hem finishing
p. 14- Topstitch the hem-facing seam on the pant legs at 0.1 cm from the facing side.

Fly topstitching
p. 19- Mark the fly topstitching line according to the markings on the front pattern piece.

Topstitching Sleeve Seam
p. 2- Press the seam allowance toward the front and topstitch it with a sewing machine, starting from the hemline up to where the allowance is attached, keeping the stitch 0.5 cm from the seam. Tuck the serger thread tails securely under the bar tack.

Related terms
requiresStraight stitch sewing machine
depends onAttaching facing
← depends onFacings Processing
depends onClipping curves
← requiresFacing