VerigaPatterns
Sewing concept

Sleeve hem lining

Attaching the sleeve lining to the sleeve hem from the inside through the garment's bottom opening.

Ask the consultant about "Sleeve hem lining"

Where it is used

29.3. Press sleeve hem allowance

p. 15
  1. Press the hem allowance of the sleeve to 2.0 cm.
29.3. Press sleeve hem allowance
Open the step in the "Anorak Sweatshirt Sewing Pattern: Summer Longsleeve with Gathers (PDF Pattern, XS-XXL, A4/Letter/Plotter)" pattern →

29.8 & 29.9. Mark and sew decorative stitch on sleeve casing

p. 16
  1. Mark the decorative stitching line on the right side of the sleeve. The stitch should be 1.2 cm from the seam. Sew the decorative stitch along the marked line of the casing.
29.8 & 29.9. Mark and sew decorative stitch on sleeve casing
Open the step in the "Anorak Sweatshirt Sewing Pattern: Summer Longsleeve with Gathers (PDF Pattern, XS-XXL, A4/Letter/Plotter)" pattern →

29.6. Trim front edge of sleeve

p. 16
  1. Trim the front edge of the sleeve. Allowance is 1.5 cm.
29.6. Trim front edge of sleeve
Open the step in the "Anorak Sweatshirt Sewing Pattern: Summer Longsleeve with Gathers (PDF Pattern, XS-XXL, A4/Letter/Plotter)" pattern →

5. Lining Preparation: Step 5.6

p. 6
  1. Press the seam allowances of the shoulder seams open on the lining.
5. Lining Preparation: Step 5.6
Open the step in the "Bubble Hem Top Pattern PDF | Gathered Neck Blouse | Sleeveless Blouson Shirt | Womens Summer Top Sewing Pattern | XS-M Digital" pattern →

7. Armhole Finishing: Step 7.2

p. 8
  1. Finish the armholes by attaching the lining to the front and back. Leave a 0.7 cm seam allowance.
7. Armhole Finishing: Step 7.2
Open the step in the "Bubble Hem Top Pattern PDF | Gathered Neck Blouse | Sleeveless Blouson Shirt | Womens Summer Top Sewing Pattern | XS-M Digital" pattern →

12. Bottom Hem: Step 12

p. 15
  1. Pin the bottom edges of the top and the lining together, making sure to match up the edges, seams, and notches, with right sides facing each other.
12. Bottom Hem: Step 12
Open the step in the "Bubble Hem Top Pattern PDF | Gathered Neck Blouse | Sleeveless Blouson Shirt | Womens Summer Top Sewing Pattern | XS-M Digital" pattern →

13. Bottom Hem: Step 13

p. 15
  1. Finish the bottom edge of the top with the lining, using a 1.0 cm seam allowance.
13. Bottom Hem: Step 13
Open the step in the "Bubble Hem Top Pattern PDF | Gathered Neck Blouse | Sleeveless Blouson Shirt | Womens Summer Top Sewing Pattern | XS-M Digital" pattern →

Sleeve Inner Seam

p. 11
  1. Sew the sleeve’s inner seam, then press the seam allowance open. Press the hem allowance of the sleeve bottom upwards.
Sleeve Inner Seam
Open the step in the "Collarless blazer sewing pattern, button-front jacket or cardigan-style jacket | Classic blazer | XS–M | A4, Letter, Plotter" pattern →

Sleeve Lining Seam

p. 14
  1. Sew the inner seam of the sleeve lining, finish the seam allowances together, and press them toward the back. Finish the bottom edge of the sleeve lining as well.
Sleeve Lining Seam
Open the step in the "Collarless blazer sewing pattern, button-front jacket or cardigan-style jacket | Classic blazer | XS–M | A4, Letter, Plotter" pattern →

Joining Outer and Lining Hem

p. 15
  1. Place the outer fabric and lining right sides together, matching the raw edges along the bottom. Sew around the hem, leaving an opening at the back (about 15 cm) so you can turn the garment right side out. Press the seam allowances toward the lining.
Joining Outer and Lining Hem
Open the step in the "Collarless blazer sewing pattern, button-front jacket or cardigan-style jacket | Classic blazer | XS–M | A4, Letter, Plotter" pattern →

Sleeve Lining Attachment

p. 15
  1. Sew the sleeve onto the lining, then finish the seam allowances together.
Sleeve Lining Attachment
Open the step in the "Collarless blazer sewing pattern, button-front jacket or cardigan-style jacket | Classic blazer | XS–M | A4, Letter, Plotter" pattern →

Sleeve Hem Lining

p. 18
  1. Turn the garment right side out. Place the sleeve lining inside the sleeve. Using the opening left at the bottom of the garment, reach inside to grab the lower edges of the sleeve from the inside and pull them out. Align the lower edges of the sleeve and lining with the right sides facing each other. Sew the seam. Repeat the process for the second sleeve.
Sleeve Hem Lining
Open the step in the "Collarless blazer sewing pattern, button-front jacket or cardigan-style jacket | Classic blazer | XS–M | A4, Letter, Plotter" pattern →

Related terms

depends onLining fabric