Neckline Finishing
The process of neatening and securing the raw edge of a garment's neckline, often with a lining or facing. Finishing the V-neckline using facings, clipping curves, and topstitching. (merged)
Where it is used
Stitching Neckline Facing
p. 9- Finish the neckline of the front and back with the neckline facing. Seam allowance: 0.7 cm.

Clipping Neckline Curves
p. 10- Clip the seam allowance of the back neckline facing at the curves.

Pressing Neckline Roll
p. 11- Press the front and back neckline, forming a 0.1 cm roll to the outside from the front and back pieces.

Topstitching Neckline
p. 15- Topstitch along the back and front neckline.

6. Neckline Finishing: Step 6.4
p. 7- Stitch along the neckline facing seam at 0.1 cm from the lining side.

6. Neckline Finishing: Step 6.1
p. 7- Pin the neckline edges of the top and lining together, matching the edges, seams, and notches. Place right sides facing each other.

6. Neckline Finishing: Step 6.2
p. 7- Finish the neckline with the lining, leaving a 0.7 cm seam allowance.

6. Neckline Finishing: Step 6.5
p. 8- Press the finished neckline, rolling the outer fabric slightly to the inside by 0.1 cm.

Basting Collar to Neckline
p. 3- Place the collar piece and the top right sides together, matching along the neckline edge. Pin in place, aligning the notches. Stitch the collar on the machine with a securing seam, using a 0.5 cm seam allowance. Press.

Assembling Neckline Facing
p. 3- Join the neckline facing into a loop: place the piece right sides together, align the short edges, and pin in place. Stitch on the machine using a 0.7 cm seam allowance, backstitching to secure. Press, then press the seam allowances open to opposite sides.

Pinning Facing to Neckline
p. 3- Place the neckline facing and the top right sides together, matching along the neckline edge. Pin, aligning the notches; match the facing seam to the center-back notch on the top. The collar sits between the facing and the top.

Preparing Center Front V-Neck
p. 4- Fold the top right sides together along the center front, matching along the neckline edge. Align the shoulder seams and the collar edges. Pin in place. Extend the center line straight up vertically along the facing.

Related terms
requiresSewing machine
requiresThread
compatible withClip Seam Allowance
compatible withPressing
compatible withRoll Seam
compatible withTopstitching
connected toLining fabric
requiresTopstitching
requiresClipping curves
requiresTopstitching