Neckline binding
The process of preparing and attaching the rib-knit neckband to the sweatshirt neckline.
Where it is used
Preparing Neckline Binding
p. 3- Fold the binding piece in half lengthwise and press flat, being careful not to stretch the fabric.
Sewing Neckline Binding
p. 3- Sew along the seam allowance at 1 cm, ensuring the stitch line catches the main edge thread. Press with an iron.
Positioning Neckline Binding
p. 3- Lay the bias tape on the right side of the dress top, matching the neckline and front edge. Do not stretch at the back neckline, but gently stretch along the straight front edge. Pin or baste in place.
Pressing the Neckline
p. 4- Stitch the bias tape in place from the right side of the dress, keeping the seam 0.7 cm from the edge. Remove basting stitches and press.
Finishing Neckline Binding
p. 4- Trim seam allowances to 0.5 cm and make small notches along the back neckline curve. Press allowances toward the binding, fold the binding to the inside, baste by hand, and stitch 0.7 cm from the front opening edge.
8. Attach neckband
p. 7- Attach and serge the Neckband to the sweatshirt neckline using a 4-thread overlock.
7. Pin neckband to neckline
p. 7- Pin the Neckband to the neckline edge of the sweatshirt, aligning the notches and shoulder seams. The placket seam should match the left shoulder seam.
10.5. Press neckband
p. 9- Press the completed neckband.
Marking Neckline Centers
p. 3- Mark the center of the front and back at the neckline edge.
Shaping Neckline Facing
p. 4- Shape the facing with an iron, giving it a gentle curve. To do this, lightly stretch the raw edge of the neckline while pressing along the fold line.
Prepare Bias Strips - Step 1
p. 4- Press the bias strips for the armhole and neckline in half, wrong sides together, along the long edges.
Baste Armhole Binding
p. 5- If you’re comfortable with sewing, you can skip the basting and attach the bias tape directly, stretching it as you sew. If you’re just getting started with sewing, it’s best to baste the bias tape first, stretching it evenly between the guide points.
Related terms
requiresNeckband
requiresOverlock stitch
requiresBias tape
depends onSewing machine
requiresPressing open
stabilized byTwill tape