VerigaPatterns
Sewing concept

Inseam assembly

Stitching the inner leg seams of the shorts legs together.

Ask the consultant about "Inseam assembly"

Where it is used

Finishing Waistband Open Edges

p. 6
  1. Finish the short open edges of the waistband pieces with a serger, then stitch from the right side and press.
Finishing Waistband Open Edges
Open the step in the "A-Line Dress Sewing Pattern | Flowy Puff Sleeve Dress PDF | Faux Wrap Midi Dress | Formal Romantic Womens Sewing | L-XXL" pattern →

Sewing Inner Waistband

p. 7
  1. Sew along the existing waistband seam. Trim allowances to 0.7 cm, press, and press the allowances up toward the top edge of the waistband.
Sewing Inner Waistband
Open the step in the "A-Line Dress Sewing Pattern | Flowy Puff Sleeve Dress PDF | Faux Wrap Midi Dress | Formal Romantic Womens Sewing | L-XXL" pattern →

Preparing Inner Waistband

p. 7
  1. On one waistband piece (inner waistband), fold 0.8 cm of the lower seam allowance to the wrong side and press in place.
Preparing Inner Waistband
Open the step in the "A-Line Dress Sewing Pattern | Flowy Puff Sleeve Dress PDF | Faux Wrap Midi Dress | Formal Romantic Womens Sewing | L-XXL" pattern →

Inseams

p. 15
  1. Finish the seam allowances on the inseams.
Inseams
Open the step in the "Barrel Leg Pants Pattern PDF | Balloon Trousers Sewing | High Waisted Pleated Pants | Tapered Womens Bottoms | XS-M" pattern →

Inseams

p. 15
  1. Pin the pants inseam edges together, matching the cut edges and notches, with right sides facing.
Inseams
Open the step in the "Barrel Leg Pants Pattern PDF | Balloon Trousers Sewing | High Waisted Pleated Pants | Tapered Womens Bottoms | XS-M" pattern →

Inseams

p. 15
  1. Sew the pants inseam edges. Seam allowance: 1.0 cm.
Inseams
Open the step in the "Barrel Leg Pants Pattern PDF | Balloon Trousers Sewing | High Waisted Pleated Pants | Tapered Womens Bottoms | XS-M" pattern →

Inseams

p. 16
  1. Press the inseam seam allowances toward the back pant piece.
Inseams
Open the step in the "Barrel Leg Pants Pattern PDF | Balloon Trousers Sewing | High Waisted Pleated Pants | Tapered Womens Bottoms | XS-M" pattern →

Pant leg hem finishing

p. 16
  1. Serge the inner edge of the pant-leg hem facing. Tuck the serger thread tails into the cover-stitch line on the wrong side using a hook.
Pant leg hem finishing
Open the step in the "Barrel Leg Pants Pattern PDF | Balloon Trousers Sewing | High Waisted Pleated Pants | Tapered Womens Bottoms | XS-M" pattern →

8. Sewing sleeves to armhole

p. 10
  1. Sew the sleeves to the armhole and finish the edge at the same time on a 4-thread serger. Seam allowance: 0.7 cm.
8. Sewing sleeves to armhole
Open the step in the "Basic V-Neck T-Shirt Pattern | Easy Knit Top PDF | Everyday Casual Womens Tee | Beginner Sewing | L-XXL" pattern →

Finish Slit Seam Allowances

p. 3
  1. On the right side of the back pieces, mark the guide points by measuring 3–4 cm up from where the slit begins. Finish the seam allowances on a serger set to a 3-thread stitch, following the marked sections. Stitch from the right side of the fabric. Press with an iron.
Finish Slit Seam Allowances
Open the step in the "Bodycon Dress Pattern PDF | Ribbed Knit Tank Dress | Fitted Midi Dress Sewing | Womens Summer Basic | XS-M" pattern →

Sew Back Center Seam

p. 3
  1. Place the back pieces right sides together, align at the center edge, and pin to match up the guide points. Insert the pins parallel to the center edge, about 3–4 cm apart. This way, the pins won’t get caught by the serger blade. Sew the seam on the overlocker set to a 4-thread stitch. Stop about 2 cm before the start of the slit, as shown. Thread the overlock chain into a knit needle or hook and tuck it neatly between the layers of fabric. With your sewing machine, finish the seam exactly at the marked starting point of the slit, as shown in the photo.
Sew Back Center Seam
Open the step in the "Bodycon Dress Pattern PDF | Ribbed Knit Tank Dress | Fitted Midi Dress Sewing | Womens Summer Basic | XS-M" pattern →

Sew Left Shoulder Seam

p. 6
  1. Stitch the LEFT shoulder seam of the dress with a serger. Sew from the back side. Press, then press the seam allowances toward the front.
Sew Left Shoulder Seam
Open the step in the "Bodycon Dress Pattern PDF | Ribbed Knit Tank Dress | Fitted Midi Dress Sewing | Womens Summer Basic | XS-M" pattern →

Related terms

requires4-thread serger