Casing topstitch
Stitching a parallel line 2.2 cm from the bottom edge to create a channel for the elastic.
Where it is used
22 & 23. Mark and sew decorative stitches on casing
p. 13- Mark stitching lines on the front panel, from the face side. The stitches should be 4.0 cm and 2.0 cm from the bottom edge of the panel. Sew decorative stitches along the marked lines on the casing.

28. Tighten and tie bows
p. 14- Tighten and evenly distribute the gathers along the casing. Tie the ends into bows.

Edgestitching the Waistband
p. 7- Edgestitch the waistband from the right side, 0.1 cm from the edge. Use neat backstitches at the beginning and end of the seam. Remove the basting threads.

Threading the bottom elastic
p. 7- CUT A 2.0 CM-WIDE ELASTIC TO THE REQUIRED LENGTH. THE RECOMMENDED ELASTIC LENGTH IS INDICATED ON THE FRONT PATTERN PIECE. THREAD THE ELASTIC INTO THE CASING THROUGH THE OPENING LEFT.

Marking the casing line
p. 7- MARK THE CASING TOPSTITCH LINE ALONG THE BOTTOM EDGE OF THE TOP, SETTING IT 2.2 CM IN FROM THE EDGE.

Topstitching the casing
p. 7- TOPSTITCH ALONG THE MARKED CASING LINE, LEAVING A 2.0 CM OPENING AT THE SIDE SEAM AREA.

Closing the casing opening
p. 8- Stitch closed the opening left in the casing’s side seam section.

Step 26
p. 10- Overlap the ends of the elastic by 1.0 cm and stitch them together. Make sure the elastic isn’t twisted.

Step 27
p. 11- Pin the elastic to the lower edge of the lining, placing it on the wrong side.

Step 28
p. 11- Sew and serge the elastic to the lower edge of the lining at the same time, using a 4-thread overlock. Stretch the elastic as you work. Allow a seam allowance of 0.7 cm.

Step 18
p. 7- Sew the ends of the waistband together, matching the notches, and leave a 2 cm opening to insert the elastic.

Cutting the closure opening
p. 6- Cut along the marked line on the front piece, stopping 1.5 cm before the guide mark.

Related terms
requiresSewing machine
← depends onThreading elastic