Women's Skirts/Womens Wrap Skirt Sewing Pattern| mini skirt pattern|pdf sewing pattern|wrap skirt|Digital Pattern | XS - M | A4, Plotter, USletter
1 / 4Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 4
Interfacing - Reinforcing Facings
- To reinforce the facing, cut two facing pieces from fusible interfacing. Attach the interfacing to the facing, then press along the fold line.
2
Page 4
Interfacing - Duplicating Facings
- Duplicate all facing pieces completely. The easiest way to do this is to fuse the entire piece of fabric meant for the facings with interfacing first, then cut out the facing pieces from the fused fabric.
3
Page 5
Sewing - Back Panel Darts
- Pin and sew the darts on the back panel of the skirt.
4
Page 6
Sewing - Pressing Darts
- Press the darts first along the edge, then iron them toward the center seam.
5
Page 7
Sewing - Pinning Side Edges
- Place the front and back fabric pieces together with the right sides facing. Line up and pin the side edges.
6
Page 7
Sewing - Stitching Side Seams
- Sew the side seams together with a 1 cm seam allowance. Finish the seam edges with a serger and press them flat.
7
Page 8
Sewing - Stitching Facings
- Stitch the side seams of the skirt top facings. Seam allowance is 1 cm. Press the allowances open.
8
Page 8
Sewing - Pressing Side Seams
- Press the side seam allowances toward the back panel.
9
Page 9
Sewing - Finishing Facing Edges
- Serge/Overlock the bottom edges of the facing.
10
Page 9
Sewing - Attaching Front Facing
- Pin the facing of the front panel along the vertical edge to the underlap/underfacing (podbort) and stitch with a seam allowance of 1 cm. Along the vertical edge of the underlap/underfacing, press the 1 cm allowance to the wrong side.
11
Page 10
Sewing - Folding Front Facing
- Fold the front facing along the fold line to the right side. Fold the facing and the garment right sides together and pin along the top edges.
12
Page 11
Sewing - Trimming Tape
- From the wrong side, trim the excess width of the bias binding/tape close to the stitching line.
13
Page 11
Sewing - Stitching Top Edge
- Stitch the top edge of the skirt and the facing. Seam allowance is 1 cm.
14
Page 12
Sewing - Trimming Seam Allowances
- Trim the seam allowances on the facing side down to 0.5 cm.
15
Page 12
Sewing - Understitching
- Understitch the seam on the facing at a distance of 0.1 cm from the seam, catching the allowances.
16
Page 13
Sewing - Pressing Hem Allowance
- Press the hem allowance along the hemline to the wrong side by 6 cm.
17
Page 13
Sewing - Pressing Facing
- Press the facing with a slight understitch to the wrong side. Secure the facing to the side seam allowances with hand stitches.
18
Page 14
Sewing - Stitching Hemline
- Fold the underlap/underfacing (podbort) to the right side and place a stitching line exactly along the hemline.
19
Page 15
Sewing - Pressing Hem Raw Edge
- Press the top raw edge of the hem allowance to the wrong side.
21
Page 16
Sewing - Stitching Hem
- Stitch the hem allowance in place 0.1 cm from the top fold.
22
Page 17
Sewing - Buttonholes
- On the right front panel, baste and cut open the buttonholes.
23
Page 18
Sewing - Attaching Buttons
- Sew the buttons onto the left panel.
