Women's Vests/Women's Classic Vest Sewing Pattern | Summer Vest pattern | DIY Tailored Vest pdf | Women Waistcoat Jacket | Plotter, USletter, A4 | XS-XXL
1 / 6Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 6
Interfacing
- Partially bond the pattern pieces of the central and side parts of the back from the inside.
2
Page 6
Interfacing
- Bond the pattern pieces from the inside: Back facing.
3
Page 6
Interfacing
- Bond the pattern pieces from the inside: Central and side panels of the front, facings, and back facing.
4
Page 6
Interfacing
- Attach a strip of interfacing, 1.0 cm wide, along the neckline edge of the central panel from the inside to the edge of the front.
5
Page 7
Back Assembly
- Press the seam allowances of the back's center seam.
6
Page 7
Back Assembly
- Sew the back center edges together with a 1.0 cm seam allowance.
7
Page 7
Back Assembly
- Pin the center back edges together, aligning edges and notches with right sides facing.
8
Page 7
Back Assembly
- Pin the back pieces together, aligning the edges and notches with right sides facing each other.
9
Page 8
Front Assembly
- Sew the front darts with a seam allowance of 1.0 cm.
10
Page 8
Back Assembly
- Press open the seam allowances of the back darts.
11
Page 8
Back Assembly
- Stitch the back darts together, leaving a seam allowance of 1.0 cm.
12
Page 8
Front Assembly
- Pin the front darts together, aligning the edges and notches, with right sides facing each other.
13
Page 9
Shoulder Seams
- Sew the shoulder edges together with a 1.0 cm allowance.
14
Page 9
Shoulder Seams
- Pin the shoulder edges, aligning them with right sides facing each other.
15
Page 9
Front Assembly
- Press the allowances of the dart seams on the front panel flat.
17
Page 10
Facings Assembly
- Press open the seam allowances of the shoulder seams of the facings and back facing.
18
Page 10
Facings Assembly
- Pin the shoulder seams of the facings and back facing together, aligning the edges with the right sides facing each other.
19
Page 10
Facings Assembly
- Sew the shoulder seams of the facings and back facing with a 1.0 cm allowance.
20
Page 10
Neckline Finishing
- Pin the facings and back facing to the neckline edges of the front and back, matching the edges, notches, and shoulder seams with the right sides facing each other.
21
Page 11
Neckline Finishing
- Topstitch the neckline seam of the front and back pieces at 0.1 cm from the facing and back facing side.
22
Page 11
Front Edge Finishing
- Pin the edges of the facings to the edges of the front, folding the facing along the neckline seam, matching the edges with the right sides together.
23
Page 11
Neckline Finishing
- Clip the seam allowances around the curves of the neckline on both the front and back pieces.
24
Page 11
Neckline Finishing
- Sew the neckline of the front and back pieces with a 0.7 cm allowance.
25
Page 12
Front Edge Finishing
- Press the front panel edge, stepping back 2.0-2.5 cm from the corner.
26
Page 12
Front Edge Finishing
- Finish the edge of the front panel. Allowance 0.7 cm.
27
Page 12
Front Edge Finishing
- Trim the seam allowances at the corners of the front panel seams.
28
Page 12
Front Edge Finishing
- Topstitch the seams of the front panel at 0.1 cm from the edge of the facing, stepping back 2.0-2.5 cm from the corner.
29
Page 13
Armhole Finishing
- Pin the armhole edges of the front and back to the edges of the facings, matching the edges, notches, and seams, and placing right sides together.
30
Page 13
Neckline Pressing
- Press the edges of the front and neckline of the back, creating a roll of 0.1 cm from the front and back pieces.
31
Page 13
Armhole Finishing
- Press the armhole area to prepare for finishing.
32
Page 13
Armhole Finishing
- Finish the armholes with facings and the back facing. Seam allowance 0.7 cm.
33
Page 14
Armhole Finishing
- Press the armhole facing to create a 0.1 cm edge from the front and back pieces.
34
Page 14
Armhole Finishing
- Make small cuts in the armhole facing seam allowances at the curves.
35
Page 14
Armhole Finishing
- Turn the garment right side out through the shoulder openings from the back side.
36
Page 14
Armhole Finishing
- Topstitch the armhole facing seam 0.1 cm from the edge of the facings and back facing in two passes, stopping at the shoulder seam.
37
Page 15
Preparation of Belt Loops
- Sew finishing stitches along the edges of the belt loop at 0.1 cm.
39
Page 15
Preparation of Belt Loops
- Press the lengthwise edges of the belt loop to the wrong side, aligning the edges.
40
Page 15
Preparation of Belt Loops
- Press the belt loop in half again, tucking the edges inside.
41
Page 16
Belt Loops Attachment
- Topstitch the loops on the side edge of the back according to the notches on the side edge.
42
Page 16
Side Seams
- Pin the side edges together, aligning the edges and notches with the right sides facing each other.
44
Page 16
Belt Loops Attachment
- Place on the right side of the back, aligning the ends of the loops to form a loop.
45
Page 17
Lining Preparation
- Mark the dart positions on the back lining from the wrong side, following the markings on the back lining pattern.
49
Page 18
Lining Preparation
- Stitch the pleat at the top of the back lining.
50
Page 18
Lining Preparation
- Press the dart allowances toward the center back.
51
Page 18
Lining Preparation
- Mark the pleat at the top of the back lining according to the pattern markings. Fold the back lining piece in half along the center fold line, aligning the edges with the right sides facing each other.
52
Page 19
Lining Preparation
- Pin the side edges of the lining together, aligning the edges with right sides facing each other.
53
Page 19
Lining Preparation
- Press the pleat allowance in the center of the back lining.
54
Page 19
Lining Preparation
- Sew the side edges of the lining, leaving a 15.0 cm opening in one of the side seams. Allowance 1.0 cm.
55
Page 19
Lining Preparation
- Press the seam allowances of the side seams towards the back lining.
56
Page 20
Attaching Lining
- Press the seam allowances where the lining is attached to the lapel and back facing towards the lining.
57
Page 20
Attaching Lining
- Sew the lining to the edge of the lapel and back facing. Leave a seam allowance of 1.0 cm.
58
Page 20
Attaching Lining
- Press the seam allowances where the lining is attached to the lapel and back facing towards the lining.
59
Page 20
Attaching Lining
- Pin the lining to the edge of the lapel and back facing, aligning the edges, notches, and seams, with the right sides facing each other.
60
Page 21
Hem Finishing
- Pin the bottom edge of the garment to the bottom edge of the lining and facing, aligning the edges and seams, with right sides together.
61
Page 21
Hem Finishing
- Sew the bottom edge of the garment with the lining. Allowance: 1.0 cm.
62
Page 22
Hem Finishing
- Press the bottom of the garment to create a 0.1 cm overlap from the top piece.
63
Page 22
Hem Finishing
- Trim the seam allowance at the corners of the garment's hem facing.
64
Page 22
Hem Finishing
- Turn the garment right side out through the opening in the side seam of the lining.
65
Page 23
Button Placement
- Mark the placement of the sew-on buttons on the panels according to the template markings.
66
Page 23
Button Placement
- On the right panel, mark from the facing side.
67
Page 23
Closing Lining Opening
- Stitch up the remaining opening by 0.1 cm, folding the seam allowances along the edge.
68
Page 24
Waistband Preparation
- Press open the seam allowances of the waistband edges.
69
Page 24
Sewing Buttons
- On the right shelf, sew the button from the lapel side, without including the shelf piece.
70
Page 24
Sewing Buttons
- Sew buttons onto the shelves according to the markings.
71
Page 24
Waistband Preparation
- Stitch the waistband edges together with the right sides facing each other. Allowance is 1.0 cm.
72
Page 25
Waistband Preparation
- Press the ends of the waistband to the inside by 1.0 cm.
73
Page 25
Waistband Preparation
- Press the waistband in half again, tucking the edges inside.
74
Page 25
Waistband Preparation
- Topstitch along the edge of the waistband at 0.1 cm, securing the pressed allowances.
75
Page 25
Waistband Preparation
- Press the lengthwise edges of the waistband to the inside, aligning the edges together.
76
Page 26
Final Steps
- Press the finished belt. Thread the belt through the loops.
