Women's Blazers/Boxy Blazer Sewing Pattern | Single Button Collarless Jacket | Easy Slouchy Coat PDF | Modern Wide Sleeve | L-XXL
1 / 4Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 1
Stay Tape Application
- Fuse the stay tape to the front neckline’s bias edge from the wrong side.
2
Page 1
Sleeve Hem Preparation
- Press the sleeve hem allowance up by 1.0 cm.
3
Page 1
Interfacing Back Neckline
- Apply interfacing to the back neckline facing from the wrong side.
4
Page 1
Interfacing
- Apply interfacing to the cut pieces from the wrong side: front facings, the back neckline facing.
5
Page 2
Pinning Shoulder Seams
- Pin the shoulder edges together, matching the right sides.
6
Page 2
Sewing Shoulder Seams
- Sew the shoulder edges together. Seam allowance 1.0 cm.
7
Page 2
Serging Shoulder Seams
- Serge the seam allowances of the shoulder seams.
8
Page 2
Sleeve Hem Folding
- Then repeat at 4.0 cm, turning the seam allowance to the wrong side.
9
Page 3
Pinning Sleeves
- Pin the sleeves to the armhole, matching the edges and notches, with right sides together.
10
Page 3
Sewing Sleeves
- Sew the sleeves into the armholes, easing the back and front slightly. Seam allowance: 1.0 cm.
11
Page 3
Pressing Shoulder Seams
- Press the shoulder seam allowances toward the back.
12
Page 3
Finishing Armhole Seams
- Finish the seam allowances on the sleeve-to-armhole seam.
13
Page 4
Pinning Side Seams
- Pin the sleeve-and-side seam edges together, matching the raw edges and placing right sides together.
14
Page 4
Pressing Armhole Seams
- Press the seam allowances from attaching the sleeve to the armhole toward the front and back armholes.
15
Page 4
Sewing Side Seams
- Sew the sleeve–side seam edges together. Seam allowance: 1.0 cm.
16
Page 4
Finishing Side Seams
- Finish the seam allowances on the sleeve–side seams.
17
Page 5
Pinning Sleeve Hem
- Pin the pressed allowance at the sleeve hem. Baste if needed.
18
Page 5
Topstitching Sleeve Hem
- Sew a topstitch along the sleeve hem, stitching 3.8 cm in from the edge.
19
Page 5
Pressing Side Seams
- Press the seam allowances of the sleeve-and-side seams toward the back.
20
Page 6
Pressing Facing Seams
- Press open the seam allowances of the shoulder seams on the front facing and the back neckline facing.
21
Page 6
Sewing Facings
- Sew the shoulder seams of the back neckline facing to the front facings. Seam allowance: 1.0 cm.
23
Page 6
Pinning Facings
- Pin the shoulder seams of the back neckline facing to the front facings, aligning the edges with right sides together.
24
Page 7
Clipping Facing Corner
- Clipping the seam allowance at the corner of the front edge.
25
Page 7
Clipping Curved Facing
- Clip the curved, pressed seam allowance, stopping 2–3 mm short of the fold.
26
Page 7
Pressing Back Neckline Facing
- Press the inner seam allowances of the back neckline facing.
27
Page 7
Pressing Front Facing Edge
- Press the inner seam allowances of the front facing.
28
Page 8
Pressing Facing with Template
- Press the facing seam allowance using a template made from the back-neck facing pattern piece, without the inner seam allowance.
29
Page 8
Attaching Neckline Facing
- Attach the back-neck facing to the front edge and to the neckline of the front and back pieces, matching the raw edges, seams, and notches, with right sides together.
30
Page 8
Pinning Front Facing
- Pin the front facing to the front edge of the garment.
31
Page 9
Stitching Neckline Facing
- Finish the neckline of the front and back with the neckline facing. Seam allowance: 0.7 cm.
32
Page 9
Stitching Front Opening
- Stitch the front opening edges with the facings.
33
Page 9
Trimming Seam Allowances
- Trim the seam allowances at the corners of the front-edge facing seam.
34
Page 10
Clipping Neckline Curves
- Clip the seam allowance of the back neckline facing at the curves.
35
Page 10
Reducing Bulk at Shoulders
- Trim the seam allowances at the shoulder seams to reduce bulk.
36
Page 10
Understitching Neckline Facing
- Topstitch the seam allowance of the front and back neckline facing from the back neckline facing side at 0.1 cm.
37
Page 10
Understitching Front Facing
- Topstitch the seam allowance of the front edge facing from the front facing side at 0.1 cm.
38
Page 11
Pressing Neckline Roll
- Press the front and back neckline, forming a 0.1 cm roll to the outside from the front and back pieces.
40
Page 11
Folding Bottom Hem
- Press again by 4.0 cm, turning the seam allowance to the wrong side.
41
Page 11
Pressing Bottom Hem
- Press the hem allowance along the bottom edge of the garment by 1.0 cm.
42
Page 12
Clipping Hem Corner
- Clip the seam allowance at the bottom of the front edge.
43
Page 12
Pinning Facing Hem
- Pin the lower edge of the facing to the bottom of the front panel’s front edge, turning it to the wrong side along the stitched edge and aligning the lower raw edges.
44
Page 12
Stitching Lower Front Edge
- Stitch the lower front edge along the pressed fold.
45
Page 13
Pinning Back Neckline Facing
- Pin the pressed inner edge of the back neckline facing to the back panel.
46
Page 13
Turning and Pressing Corner
- Turn the stitched corner of the front edge to the right side and shape it neatly. Press the stitched corner, forming a 0.1 cm turn of cloth along the bottom from the front piece.
48
Page 13
Pinning Front Facing Inner Edge
- Pin the pressed inner edge of the front facing and the lower seam allowance to the front piece.
49
Page 14
Marking Neckline Topstitch
- Mark the topstitch line along the neckline of the front and back, keeping 3.8 cm from the edge.
50
Page 14
Basting Back Neckline Facing
- If needed, baste the seam allowance.
51
Page 14
Topstitching Front Edge
- Sew a topstitch along the front edge.
52
Page 14
Marking Topstitch Line
- Mark the topstitch line along the front edge and the garment hem.
53
Page 15
Pressing Front Edge Topstitching
- Press the topstitched front-edge seams.
54
Page 15
Topstitching Neckline
- Topstitch along the back and front neckline.
55
Page 15
Topstitching Hem
- Topstitch along the garment hem along the marked line. Remove the basting threads.
56
Page 15
Pressing Neckline and Hem
- Press the neckline on the front and back, and the garment hem.
58
Page 16
Marking Buttonholes
- Mark the buttonhole and button placement along the right and left front edges, following the markings on the front pattern piece.
59
Page 17
Cleaning Buttonholes
- Clean the buttonholes on the front panels.
60
Page 17
Sewing Buttons
- Sew on the buttons on the right and on the left front panels.
61
Page 18
Sewing Hidden Button
- Sew a hidden button to the wrong side of the right front panel, aligning it with the button placement marked on the right side.
